Single Head Edge Polisher for shaping & polishing most convex and flat edge profiles.
Lengths from 1′ to 12′ and thicknesses from 3/8″ to 4″
(spindle adjustment required on material over 2-1/2″ thickness).
Dual speed spindle: (2) with 2.5 HP @ 1,710 & 3,420 RPM.
Pneumatic head travel and position lock (with pressure gauge and adjustment);
spindle angle rotation 0° – 189° by C-arm with hydraulic rack & pinion drive.
Center water feed,
internal air purge system,
tool adapter to accept 100 mm snail lock or 5/8 – 11 threaded connections,
shape tool adapter.
Variable speed hydraulic cross-travel at 15 – 100 FPM,
Heavy Duty rack & pinion drive system with hardened steel rails and slide bearings,
12′ L x 4′ W bed with rubber matted surface, pneumatic pop-up rollers on full table to assist in positioning, loading, and unloading (2,500 Lbs total lifting cap.
(5) Adjustable pneumatic holddowns with aluminum extrusion extensions, adjustable PARK bench to support long pieces.
Easy to use, full color high resolution touch screen displays complete information to control machine and setup edge profiles, programmable library with repeatable edge profiles allowing different machine setups to be made quickly & easily, PLC control of the transverse speed, spindle amps (load), leading & trailing pass locations, number of passes, degrees of spindle angle setting.
Electrical: 240 Volt, 3 Phase, 60 Cycle, 30 Amps; Air – 8 CFM & 100 PSI clean air; Water – 5 GPM with a 50 PSI line pressure.
machine has been very well taking care of and serviced by park industries often
Machine is available for inspection
Machine is sold as is/where is and implies no warranties
Buyer is responsible for tear down, rigging, shipping, and installation (quote can be provided upon request)
Machine is subject to prior sale