Sales Representative Name: Justin Luth
Phone Number: 855-456-2588 EXT. 1004
Category: Edge Polishers
Year: 2006
Make: Park Industries
Model: Pro Edge III
Under Power: Yes
Voltage:
Location: Oregon
Asking Price: $14,500.00
FINANCING AVAILABLE FROM 12 TO 60 MONTHS - ONE PAGE APPLICATION & 3 MONTHS BUSINESS BANK STATEMENTS REQUIRED. CLICK ON FINANCING TAB ON HOME PAGE FOR FURTHER INFORMATION OR CALL US AT 855-456-2588 2006 Park Pro Edge III
Known issues:
C-Arm is worn and only does flat polish.
Some of the pop up rollers are stuck.
*Videos of machine in operation below*
2/2.5 HP, 1710/3420 RPM
Pneumatic head travel with position lock (with pressure gauge and adjustment); stroke length: 2
Center water feed
Internal air purge system
Tool adapter to accept 100mm snail lock or 5/8-11 NC connections
Shape tool adapter
Spindle Miter:
0 to 189 degree miter range
Hydraulic rack and pinion drive
Hardened alloy-steel C-arm with powder-coated finish
Rise and Fall:
3 rise and fall travel
Round rail precision guide system
Manual positioning with pointer/ruler display
Cross Travel:
Hydraulic, 15-100 FPM variable speed
Heavy-duty rack and pinion drive system
Cross travel carried on two chrome hardened steel rails with slide bearings, automatically lubricated
Table and Clamping:
12'L x 4'W precision-machined tabletop work area with rubber matted surface
Pneumatic, pop-up, all way rollers to assist in positioning, loading and unloading stone (2,500 lbs. total lifting capacity)
Five adjustable, pneumatic hold downs with aluminum extension bars
Built-in storage for aluminum extension bars
Adjustable PARK bench to support long pieces
Construction:
Table: Heavy-duty structural steel/plate construction, stress relieved and precision machined
Bridge: Tubular bridge design, stress relieved and precision machined
Electrical and Plumbing Requirements:
Electrical power at machine: 240 volt (+/- 10%), 3 phase, 60 Hz, 30 amps required
Air at machine: 8 SCFM volume, 100 PSI pressure free of oil, water and grit larger than 25 micron (3/8 I.D. air line)
Water supply at machine: 5 GPM, 50 PSI, filtered to 5 micron (1/2 I.D. water line with clean, fresh water)
Capabilities:
A variety of convex edges (3/8" to 6" thick) and flat edges (3/8" to 4" thick) can be shaped and polished
A variety of concave edges can be shaped
Ogee edges can be shaped and polished
Shaping and polishing length: 1' to 12' long
Profile shaping and polishing thickness from 3/8" to 6" (spindle adjustment required on stone over 2-1/2" thick, must bevel corners on stone over 3" thick)
Radius capacity: 0" to 3" radius
All way rubber pop-up roller system allows work pieces to be loaded and positioned easily without scratching or breaking
The top line can be controlled on all types of stone to achieve the profile blend that suits your needs
Bull-nose edges, including laminates, are back gauged and polished, even past the bottom transition line
Uniform edges on each individual job
An 80% reduction in labor cost on lineal footage can be achieved
Unmatched setup time
Eliminates double-cutting of lamination
Compared to hand tools, abrasives cost per linear foot may be reduced by as much as 60%
Weight: 15,000 lbs.
Overall dimensions: 19'-2'L x 6'W x 8'-6'H
Floor space requirements: 23'L x 13'W x 8'6'H
Disclaimer: All the information needs to be verified by the manufacturer.
*Video of machine in operation*
[video width="368" height="656" mp4="
https://stoneequipmentwarehouse.com/wp-content/uploads/2020/11/received_2861523087458081-1.mp4"][/video]
[video width="368" height="656" mp4="
https://stoneequipmentwarehouse.com/wp-content/uploads/2020/11/received_375800440192791-1.mp4"][/video]
[video width="368" height="656" mp4="
https://stoneequipmentwarehouse.com/wp-content/uploads/2020/11/received_724536158448276-1.mp4"][/video]
