Description
Seller is getting a Horizontal polisher and does not have room for both.
Has service records from Park Industries.
Comes with in and out feed rollers and a box full of pads.
Features& Benefits and specifications are from the manufacturer’s web site and cannot be guaranteed for this 2006 model.
Straight flat edge from 1 cm to 6 cm thick material
45-degree chamfer top and bottom edge corners up to 1/16″
Piece length: 16″ to 12′
Piece width: 3″ to 30″ (wider stones possible with operator assistance)
Piece thickness: 1 to 6 cm
12″ per minute on granite (2 cm flat edge with 1/16″ chamfer, medium hard grade)
High-speed flat-edge performance
Spindle oscillation eliminates lines
Non-marring pneumatic clamping rollers
Non-slip, non-marring belt
Easy-to-use touch-screen controls
Specifications
Weight: maximum 5,000 lbs.
Overall dimensions: 22′ 2″ long x 4′ 2″ wide x 5′ high (including input, output conveyors)
Spindles:
Vertical stone flow-through design utilizing nine spindles
Spindle #1: gauging/polishing spindle with 2″ pneumatic floating range with hard stop, 2 HP drive motor at 1750 RPM
Spindles #2-7: polishing spindles with 2″ floating range, 2 HP drive motor at 1750 RPM
Spindle #8-9: chamfer spindle set at 45 degrees with 2″ pneumatic floating range and position lock, 2 HP drive motor at 1750 RPM
Spindle micro-oscillation on heads #1-7
Tooling:
Diamonds or bricks
Tool adapters for 6″ tools on all polishing spindles
Hold-Downs:
21 spring-loaded, non-marring clamping rollers with manual crank adjustment
Built-in skew to minimize stone shifting
Powered Belt Conveyor Drive:
13-1/2″‘ wide x 8′ 10″ long non-slip, non-marring conveyer belt
3/4 HP heavy-duty AC motor with programmable variable frequency drive speed control (4″ to 72″ per minute)
Input/Output Conveyors:
7′ infeed and discharge conveyors with rollers and guide fence
Operation from right to left as viewed from front of machine
Construction:
Frame: heavy-duty structural steel/plate construction, stress relieved and precision machined
Spindle bridge: rigid torsion box design, stress relieved and precision machined
Machine Capabilities: Edge Types:
Straight flat edge from 1 cm to 6 cm thick material
45-degree chamfer top and bottom edge corners up to 1/16″
Stone Capacity:
Piece length: 16″ to 12’
Piece thickness: 1 cm to 6 cm
Production: (15 GPM and 45-95psi of Water also.)
12″ per minute on granite (2 cm flat edge with 1/16″ chamfer, medium hard grade)
Controls:
Operator programmed parameters include but are not limited to:
Drive motors (on/off): conveyor, polishing heads (individual), chamfer heads (individual)
Head actuation (in/out)
Individually adjusted tool pressure
Adjustable spindle.
Machine is available for inspection if necessary.
Machine will be sold as is / where is and implies no warranties.
Buyer responsible for tear down, rigging, freight and installation.
Subject to prior sale.